A colorless resin base, with refined clay, for mixing with colors for increased opacity.

Refer to Transparent Bases TDS for more.

Fabric primer: Apply direct to shirt to “lock down” fabric knap, allowing for tighter lines & cleaner colors.

Also works as a light protective coating, especially t-shirt and fabric painting.

Add to extend paint for increased transparency while maintaining a higher viscosity compared with only adding 4011 Reducer.

The colorless resin base to Createx Airbrush Colors.

For medium tip-sizes, 0.3mm+, sprayed at reduced pressures, extend generously ~ 50% per volume with 5601 Transparent Base, then thin 10% - 20% with 4011 Reducer.

Best sprayed with a larger volume, tip-sized airbrush operated at 35 – 45+ psi.

Best applied over white, grey or black base, such as Createx Airbrush Opaque Colors.

Spray well through most tip-sizes, 0.5mm – 0.3mm.

Highly translucent, low viscosity colors.

Tip: if using for an exterior finish (such as a helmet), first apply Createx Opaque Airbrush Colors (or AutoBorne Sealer) as a color-keyed base to better hide eventual color loss from direct light and improve coverage.

Not Lightfast! Not recommended for long-term or exterior applications.

Psi can vary per tip-size, best 25 – 40+ psi.

0.18mm, Createx Wicked Detail & Illustration Colors spray better.

Best sprayed through large to medium airbrush tip-sizes, down to 0.3mm.

For increased transparency without over thinning, extend with 5601 Transparent Base.

Translucent colors with a high pigment volume for semi-opaque coverage out of the bottle.

For Opaque Colors which can be sprayed through medium and small tip-sizes down to 0.18mm at under 20 psi Createx Illustration Opaque Colors work best.

Even when over-reduced, Opaque Colors work better with large tip-sizes. Not for small airbrush tip-sizes smaller than 0.35mm.Best sprayed with a 0.5mm / large tip-sized airbrush at higher psi settings, 35 – 45+ psi.Cover opaque out of the bottle in 2 – 3 coats.Technical Data Sheet Createx Airbrush ColorsĮdited March 2021 – This tech sheet supersedes any other inconsistent information, including the labelĬreatex Airbrush Colors are fluid acrylic colors with specialized performance for airbrush and spray-gun application.Ĭolors are made with a supple, yet durable acrylic resin that is well suited for painting fabric and textiles with a finish that leaves a “soft-hand” feel.Ĭreatex Airbrush Colors are designed to cover and spray best with larger tip-sizes at higher psi settings compared to Wicked Colors and Illustration Colors which are better suited for fine-line performance through smaller airbrush tip-sizes at lower psi settings.Ĭreatex Airbrush Colors are made with lightfast pigments, the same pigments Wicked Colors and Illustration Colors.

Airbrush paint viscosity test printable